Author Topic: engine improvements  (Read 1858 times)

Offline Klaus

  • Valued Contributor
  • ****
  • Join Date: Jun 2015
  • Posts: 382
  • Karma: 10
Re: engine improvements
« Reply #15 on: 29.03. 2019 16:30 »
Hello berger,

I will feed you up with good advice for some improvements. But its for enthusiast bolt(d)smashers *eek*

time to post somenews....

cheers Klaus


If you think, everything is under control, you are not fast enought.

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8505
  • Karma: 112
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: engine improvements
« Reply #16 on: 29.03. 2019 23:34 »
G'day berger.
Lightened (just a little) and balanced the rockers. Removed the spring washers and replaced with shims (less drag). Tapered duralumin pushrods but their starting to wear so will be looking at VW rods to replace them soon.
Cheers
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7

Online Slymo

  • A's Best Friend
  • ***
  • Join Date: Jul 2018
  • Posts: 227
  • Karma: 3
Re: engine improvements
« Reply #17 on: 30.03. 2019 10:40 »
Perhaps not as acurate but reassuringly quick to put hex in a 3 jaw.:)
NZ