Author Topic: RGS rear guard positioning, help needed  (Read 253 times)

Offline spanersc

  • A's Best Friend
  • ***
  • Join Date: Dec 2008
  • Posts: 169
  • Karma: 1
  • Cambridgeshire. UK
RGS rear guard positioning, help needed
« on: 27.07. 2015 07:02 »
Hi All. I'm looking to fit a correct type rear guard to my 1962 RGS in place of the very non original one it came with. At the very front lower end of the guard theres an angle bracket and my questions are, does this bracket sit above or below the lug on the frame? And how far up from the lower edge of the guard are the 2 fixing holes? If any members have a nice original bike and could provide these details and perhaps a photo it would be much appreciated. Many Thanks in anticipation. Peter
Peter C    Cambridgeshire. UK   1935 Blue Star. 1950 A7 Rigid.  1952 A7ST.  1953 A7ST.  1953 A10 Super Flash.  1954 A7ST.  1955 A7SS.  1955 A10.  1956 A10RR.  1962 RGS.  1962 DBD34

Online chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 3212
  • Karma: 46
Re: RGS rear guard positioning, help needed
« Reply #1 on: 27.07. 2015 11:26 »
Hi Peter,
This thread has some photos which should help

http://www.a7a10.net/forum/index.php?topic=4564.msg30842;topicseen#msg30842

HTH
John
1961 Super Rocket
1963 RGS (ongoing)