Author Topic: Why Two Part Nums for A7/A10 Cam Follower?  (Read 291 times)

Offline Peter Gee

  • Valued Contributor
  • ****
  • Join Date: Apr 2015
  • Posts: 268
  • Karma: 1
Why Two Part Nums for A7/A10 Cam Follower?
« on: 29.07. 2015 15:29 »
Hi,

What is the difference in A7SS/A10 cam followers that they have differing part numbers, and how do you tell which is which between 67-332 and 67-333?

Much appreciated

Peter In Kenya

Online Klaus

  • Valued Contributor
  • ****
  • Join Date: Jun 2015
  • Posts: 360
  • Karma: 10
Re: Why Two Part Nums for A7/A10 Cam Follower?
« Reply #1 on: 29.07. 2015 17:09 »
Hi Peter,

the difference is head design and wight.
One have rounded head and look more massive. Wight is 58 gramms
The light ones looks a bit like a tower and is smaller in circuit at the head. 50 gramms

But I don't know the partnumbers each one.

Cheers Klaus


If you think, everything is under control, you are not fast enought.

Offline Peter Gee

  • Valued Contributor
  • ****
  • Join Date: Apr 2015
  • Posts: 268
  • Karma: 1
Re: Why Two Part Nums for A7/A10 Cam Follower?
« Reply #2 on: 29.07. 2015 21:12 »
Ive written my post confusingly. What I meant to say was, why are the cams a set, yet have different part numbers and what is that difference? Klaus has kindly weighed them. I wish to buy new repro set and fear they will be all one type instead of two 332 and two x 333.

Thanks guys

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8022
  • Karma: 106
  • Lake Conjola NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Why Two Part Nums for A7/A10 Cam Follower?
« Reply #3 on: 29.07. 2015 21:48 »
G'day Peter. A set will have two of each. The outer two are different to the inner two due to the holding mechanism.
Cheers
'51 A7 plunger, '57 A7SS now A10CR, '76 XT500, '77 AG175 '83 CB1100F, '81 CB900F project.
Australia
Muskys Plunger A7

Offline Peter Gee

  • Valued Contributor
  • ****
  • Join Date: Apr 2015
  • Posts: 268
  • Karma: 1
Re: Why Two Part Nums for A7/A10 Cam Follower?
« Reply #4 on: 29.07. 2015 22:10 »
Thanks Muskrat, that is exactly what I needed to know.