« previous next »
Pages: [1]   Go Down

Author Topic: A10 Fork Stanchions  (Read 948 times)

Offline rtree

  • Active
  • *
  • Join Date: Sep 2015
  • Posts: 2
  • Karma: 0
A10 Fork Stanchions
« on: 22.09. 2015 19:48 »
As I'm new to the Forum, allow me to say hello to everyone.
 
I have been looking at an advert on the net for A10 Fork Stanchions, where the BSA Part No. 89-5061 is quoted. The seller describes them to be L:573mm, OD: 35mm, ID: 26mm. I assume the latter size is to accommodate  the  top yoke. Can anyone confirm that these dimensions are correct.  If not, what are the sizes for the following  BSA Part No 89-5061 Length. x OD x OD at yoke? Thanks in anticipation. 
Logged

Offline WozzA

  • Wise & Enlightened
  • *
  • Join Date: Nov 2011
  • Posts: 1480
  • Karma: 18
  • Melbourne Australia
Re: A10 Fork Stanchions
« Reply #1 on: 24.09. 2015 02:08 »
Welcome to the forum..   *welcome*

Length           577mm
Top                30.16mm
Widest           34.98mm
from taper     33.99mm


Logged
'51 Golden Flash Plunger
'57 Golden Flash Swingarm

Melbourne
The biggest lie I tell myself is
"I don't need to write that down, I'll remember it"

Offline rtree

  • Active
  • *
  • Join Date: Sep 2015
  • Posts: 2
  • Karma: 0
Re: A10 Fork Stanchions
« Reply #2 on: 24.09. 2015 21:41 »
Hi Wozza, Thanks for the welcome and going to the trouble to provide the information. It is very much appreciated.
Logged
Pages: [1]   Go Up
« previous next »