Author Topic: K2F mag  (Read 332 times)

Offline KeithA

  • A's Best Friend
  • ***
  • Join Date: Oct 2015
  • Posts: 51
  • Karma: 1
K2F mag
« on: 28.10. 2015 12:55 »
Hello all;
I have tried to remove the auto advance unit from my K2F mag, so I can withdraw the mag for an overhaul.
I undone the bolt (with horseshoe washer under it) anticlock wise.
It has undone about 6 turns, then became tight. I don't want to force it. Am I doing something wrong.
Any advise please.
Thanks in advance.
Keith Atkinson

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5444
  • Karma: 62
Re: K2F mag
« Reply #1 on: 28.10. 2015 13:02 »
probably not Keith,  lt will become tighter as it starts to pull the A/U unit off it's taper, proviso is what your definition of tight is compared to others, but will go from slack to tighter
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Offline KeithA

  • A's Best Friend
  • ***
  • Join Date: Oct 2015
  • Posts: 51
  • Karma: 1
Re: K2F mag
« Reply #2 on: 28.10. 2015 13:07 »
Yes it has probably not gone tight as in very tight, but I just thought it should just unscrew normally.
I'd like to ask first rather than break something.
Thanks Keith