Author Topic: Correct pistons for A10 ?  (Read 604 times)

Offline v8ivor

  • A's Best Friend
  • ***
  • Join Date: Apr 2015
  • Posts: 112
  • Karma: 1
Correct pistons for A10 ?
« on: 01.11. 2015 14:27 »
Does anyone recognise this piston ?
Sorry, but I cannot attach a photo because it tells me that "An error has occurred " it is to large (Over 1500 Kb)

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8269
  • Karma: 106
  • Lake Conjola NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Correct pistons for A10 ?
« Reply #1 on: 01.11. 2015 19:04 »
http://www.a7a10.net/forum/index.php?topic=427.msg40190#msg40190
Resize your picture. Ask the 5 year old nextdoor!
Cheers
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7

Offline v8ivor

  • A's Best Friend
  • ***
  • Join Date: Apr 2015
  • Posts: 112
  • Karma: 1
Re: Correct pistons for A10 ?
« Reply #2 on: 01.11. 2015 20:25 »
Nope ! I just can't do it !

Online chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 3260
  • Karma: 47
Re: Correct pistons for A10 ?
« Reply #3 on: 01.11. 2015 22:26 »
Hi,
Quote
Nope ! I just can't do it !

reminded me of this????? *lol* *lol* *lol*

https://www.youtube.com/watch?v=J9PwWq3le9A


LOL
John
1961 Super Rocket
1963 RGS (ongoing)

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8269
  • Karma: 106
  • Lake Conjola NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Correct pistons for A10 ?
« Reply #4 on: 03.11. 2015 08:39 »
G'day Ivor.
Besides the 7 marking is there any other numbers or letters inside the piston?
Cheers
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7

Offline v8ivor

  • A's Best Friend
  • ***
  • Join Date: Apr 2015
  • Posts: 112
  • Karma: 1
Re: Correct pistons for A10 ?
« Reply #5 on: 03.11. 2015 19:24 »
Thanks ever so much again every one. I called C&D this-morning ( Thanks Richard L ) and they asked the same as you Jim, the 11062A confirms that it is a Hepolite 7.25:1 piston, so their rings will fit. I've honed the bores and will set the ring gaps to .020 as Bill explained in his reply to my other post.