« previous next »
Pages: [1]   Go Down

Author Topic: A10 Crank Case connecting Nut.  (Read 382 times)

Offline David

  • Moving Up
  • **
  • Join Date: Aug 2015
  • Posts: 22
  • Karma: 0
A10 Crank Case connecting Nut.
« on: 19.08. 2016 13:37 »
I've attached a picture the connecting nut and bolt for the engine plate just under the dynamo on my Road Rocket. Out of interest, why is the nut shaped so, when an ordinary nut would suffice? Also, should it be a bolt or a stud? Thanks. David.
Logged

Offline a101960

  • Wise & Enlightened
  • *
  • Join Date: Sep 2007
  • Posts: 1072
  • Karma: 12
  • BSA RGS BSA C12
Re: A10 Crank Case connecting Nut.
« Reply #1 on: 19.08. 2016 14:34 »
Looking at the spare parts manual what you have there is: Bolt p/n 42-4470 and nut p/n 67-1292. The nut and bolt are shown as going into the top hole on the engine plate. Also needs a spring washer
Logged

Online RichardL

  • Outside Chicago, IL
  • Wise & Enlightened
  • *
  • Join Date: Nov 2007
  • Posts: 6388
  • Karma: 55
Re: A10 Crank Case connecting Nut.
« Reply #2 on: 19.08. 2016 14:38 »
As I see it, because of the dynamo tower and/or cover, you can't get a spanner on the nut if it's up against the mounting plate.

Richard L.
Logged
Pages: [1]   Go Up
« previous next »