Author Topic: 1953 BA7S fender  (Read 311 times)

Offline manxman

  • A's Best Friend
  • ***
  • Join Date: Jul 2017
  • Posts: 57
  • Karma: 1
1953 BA7S fender
« on: 19.08. 2017 17:47 »
Is the correct 1953 BA7S rear fender hinged or solid? Ribbed or flat?  The fender on my bike is one piece and ribbed !!
Good Advice
0
No reactions

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 6427
  • Karma: 35
Re: 1953 BA7S fender
« Reply #1 on: 19.08. 2017 17:52 »
Ribbed for her pleasure!
Good Advice
0
No reactions

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8469
  • Karma: 111
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: 1953 BA7S fender
« Reply #2 on: 19.08. 2017 21:12 »
And hinged.
Cheers
Good Advice
0
No reactions
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7

Online WozzA

  • Wise & Enlightened
  • *
  • Join Date: Nov 2011
  • Posts: 1319
  • Karma: 17
  • Melbourne Australia
Re: 1953 BA7S fender
« Reply #3 on: 19.08. 2017 23:46 »
my 51 plunger rear guard is neither ribbed or hinged.. 
Good Advice
0
No reactions
'51 Golden Flash Plunger
'57 Golden Flash Swingarm

Melbourne
The biggest lie I tell myself is
"I don't need to write that down, I'll remember it"

Offline BSA_54A10

  • Wise & Enlightened
  • *
  • Join Date: May 2008
  • Posts: 2033
  • Karma: 32
    • BSA National
Re: 1953 BA7S fender
« Reply #4 on: 23.08. 2017 11:09 »
Then you have an M series one in there
Good Advice
0
No reactions
Bike Beesa
Trevor