Author Topic: Considering dynamo belt conversion  (Read 3847 times)

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9811
  • Karma: 49
Considering dynamo belt conversion
« on: 26.05. 2018 09:06 »
As I currently have my bikes engine stripped I'm pondering converting to a belt drive for the dynamo purely to reduce engine noise. What are the pro's and con's? I'm not bothered about converting to 12v electrics so would not be changing bulbs battery and regulator, (DVR2). I understand the belt drive changes the drive ratio to speed up the dynamo; does that wear the dynamo out quicker?
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash

Offline Joolstacho

  • Wise & Enlightened
  • *
  • Join Date: Jan 2010
  • Posts: 1094
  • Karma: 7
Re: Considering dynamo belt conversion
« Reply #1 on: 26.05. 2018 09:12 »
Wow, is belt drive going to make any noticeable difference to 'engine noise'?
I doubt it.

Online Triton Thrasher

  • Scotland
  • Wise & Enlightened
  • *
  • Join Date: Feb 2009
  • Posts: 1928
  • Karma: 23
Re: Considering dynamo belt conversion
« Reply #2 on: 26.05. 2018 09:35 »
Wow, is belt drive going to make any noticeable difference to 'engine noise'?
I doubt it.

No and what’s wrong with engine noise anyway!

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9811
  • Karma: 49
Re: Considering dynamo belt conversion
« Reply #3 on: 26.05. 2018 10:30 »
Just thinking as I'm doing stuff that should give me a quieter engine I could eliminate dynamo chain rattle.
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash

Offline Joolstacho

  • Wise & Enlightened
  • *
  • Join Date: Jan 2010
  • Posts: 1094
  • Karma: 7
Re: Considering dynamo belt conversion
« Reply #4 on: 26.05. 2018 10:40 »
If it's rattling i's either:
WORN,
MALADJUSTED (like me), or
Not enough grease in there.
Man, just pack it, rotate it, and love it!

Offline RogerSB

  • 1960 Golden Flash, Plymouth, Devon, England
  • Resident Legend
  • *****
  • Join Date: Aug 2017
  • Posts: 854
  • Karma: 9
Re: Considering dynamo belt conversion
« Reply #5 on: 26.05. 2018 11:51 »
Without considering increasing dynamo output slightly for a 12v conversion some of the benefits I can think of are:-

It’s always clean in there.
Less maintenance as it doesn’t wear so much as a chain
If it breaks it’s unlikely to do a lot of damage – unlike a chain.
If you do want to convert in the future you’re half way there.
Some say it’s quieter but it’s a long time since I’ve heard the rattle of a dynamo chain to make a comparison.

1960 Golden Flash

Online orabanda

  • Wise & Enlightened
  • *
  • Join Date: Nov 2008
  • Posts: 1180
  • Karma: 24
Re: Considering dynamo belt conversion
« Reply #6 on: 26.05. 2018 12:18 »
More importantly, the pulley on the dynamo is smaller; the dynamo runs faster therefore will start charging at lower engine speeds (commuting, around town).
The SRM kit spins the dynamo 10% faster.

The more recent alternative (can't remember name) speeds the dynamo up 20% and has a wider (15mm) belt.

Richard

Offline Billybream

  • Resident Legend
  • *****
  • Join Date: Jan 2012
  • Posts: 640
  • Karma: 8
Re: Considering dynamo belt conversion
« Reply #7 on: 26.05. 2018 12:22 »
Agree with Roger, for me it's one less thing to worry about so you can devote more time to the things you have do whilst keeping our old girls alive and kicking.
1960 Super Rocket, owned since 1966, back on the road 2012 after being laid up for 29yrs.

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 10760
  • Karma: 130
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Considering dynamo belt conversion
« Reply #8 on: 26.05. 2018 12:28 »
I've got belts on both of mine. Yes it is quieter. Set and forget.
I did have trouble in the start by having them too tight. Just right is very loose compared to the chain. The downside of that is if the screw boss has had chain damage it can eat the belt.
Cheers
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Offline RogerSB

  • 1960 Golden Flash, Plymouth, Devon, England
  • Resident Legend
  • *****
  • Join Date: Aug 2017
  • Posts: 854
  • Karma: 9
Re: Considering dynamo belt conversion
« Reply #9 on: 26.05. 2018 12:37 »

The more recent alternative (can't remember name) speeds the dynamo up 20% and has a wider (15mm) belt.

Richard

It's by Dynamo Regulators Ltd., who also make the well respected, well used DVR2.  Mike Hutchings is a forum member and goes by Dynamo Regulators Mike. I think his version is the best. Mine is by SRM and was on my bike when I bought it but if I had to change it it would be replaced by the one made by Dynamo Regulators.

Edit: Crikey! I'm spending all my time on here lately.

1960 Golden Flash

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9811
  • Karma: 49
Re: Considering dynamo belt conversion
« Reply #10 on: 26.05. 2018 12:54 »
I have the DVR2, which has been trouble free so I'm inclined to go for that set.
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash

Online morris

  • Wise & Enlightened
  • *
  • Join Date: Aug 2012
  • Posts: 1763
  • Karma: 27
  • Antwerp, Belgium
Re: Considering dynamo belt conversion
« Reply #11 on: 26.05. 2018 15:59 »
Have Dynamo Reg on both plunger (6v) and SA (12v). No issues. Fit and forget.
'58 BSA A 10 SA
'52 BSA A 10 Plunger
'55 MORRIS ISIS
The world looks better from a motorbike
Belgium

Online groily

  • Wise & Enlightened
  • *
  • Join Date: Jul 2007
  • Posts: 1844
  • Karma: 31
    • www.brightsparkmagnetos.com
Re: Considering dynamo belt conversion
« Reply #12 on: 26.05. 2018 16:25 »
Sorry to hear about your woes GB  . . . but good luck, sounds as if you're all over it already.

On the belt thing, I have the same kit as Morris (and DVR2 running at 12). Haven't thought about it since fitting it a couple of years back. Which means I like it!
Probably is a bit quieter but it's a long time since I had a chain on there 'cos prior to the Dyn Reg Mike kit, I had the SRM one. (Which I did manage to kill in the end.)

Does it knacker the dynamo turning it faster? Don't think so - my dyn has lasted over 10 years without major surgery, and dunno how long it had been running before I got my hands on it. That's longer than any other dynamo on other bikes hereabouts, and I think is pretty darn good. (Mind you, I'm not doing Musky Revs!) It'll now fail, natch.

One point worth bearing in mind: You might find you have to ease off a little bit of alloy on the inner timing case 'compartment wall' to get pulley clearance: some castings are a bit fatter than others. I had to shave a bit off when fitting the first kit, to get the drive pulley on with adequate clearance and I believe some other people have had to do the same. But only talking a gnat's cock's worth and a dremel. (So, yes, an insect was seriously mutilated in the course of doing the mod, so I apologise to any outraged #metoo entomologists.)

But I guess the key Q is - Is it actually worth it for a 6v system, which will be quite fine as it was designed??
Bill

Online morris

  • Wise & Enlightened
  • *
  • Join Date: Aug 2012
  • Posts: 1763
  • Karma: 27
  • Antwerp, Belgium
Re: Considering dynamo belt conversion
« Reply #13 on: 26.05. 2018 16:37 »
One point worth bearing in mind: You might find you have to ease off a little bit of alloy on the inner timing case 'compartment wall' to get pulley clearance: some castings are a bit fatter than others. I had to shave a bit off when fitting the first kit, to get the drive pulley on with adequate clearance and I believe some other people have had to do the same. But only talking a gnat's cock's worth and a dremel. (So, yes, an insect was seriously mutilated in the course of doing the mod, so I apologise to any outraged #metoo entomologists.)
Right, forgot about that. The plunger needed a shave but the SA didn’t so there seems to be some variety in the cases.
'58 BSA A 10 SA
'52 BSA A 10 Plunger
'55 MORRIS ISIS
The world looks better from a motorbike
Belgium

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9811
  • Karma: 49
Re: Considering dynamo belt conversion
« Reply #14 on: 26.05. 2018 16:55 »
Thanks, chaps; some great advice.
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash