Author Topic: dynamo drive belt conversion  (Read 607 times)

Offline Gerry

  • Valued Contributor
  • ****
  • Join Date: Nov 2012
  • Posts: 261
  • Karma: 6
dynamo drive belt conversion
« on: 10.06. 2019 11:54 »
Hi guys, OK can anyone give me the number of teeth and diameters of the dynamo drive belt conversion? SRM or otherwise. Thanks Gerry

Offline Gerry

  • Valued Contributor
  • ****
  • Join Date: Nov 2012
  • Posts: 261
  • Karma: 6
Re: dynamo drive belt conversion
« Reply #1 on: 11.06. 2019 00:46 »
Sorry should have said the sprockets/pulleys

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 41
Re: dynamo drive belt conversion
« Reply #2 on: 11.06. 2019 08:58 »
 
 I have it noted down somewhere, but not accessible just now... but I think the belt is a AT5 420 (5mm pitch/420 long- 84 teeth or something like that   *conf2* or some dyslexic variation of)
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Offline Gerry

  • Valued Contributor
  • ****
  • Join Date: Nov 2012
  • Posts: 261
  • Karma: 6
Re: dynamo drive belt conversion
« Reply #3 on: 11.06. 2019 10:09 »
Hi Dutch, Exactly right as I found on previous post here but couldn't find any info' on the sprockets. Cheers Gerry