Author Topic: Headlamp shell light switch  (Read 333 times)

Online AdrianJ

  • A's Best Friend
  • ***
  • Join Date: Oct 2018
  • Posts: 139
  • Karma: 1
Headlamp shell light switch
« on: 14.07. 2019 13:23 »
This one is driving me daft.
There was no clip on the rotary switch in the headlamp nacelle when I dismantled it. (53 plunger A10)
I've got a new switch with an octagonal bent wire clip, but I can't work out how to use the clip to secure the switch.
Any instruction gratefully received.
Nearly finished - tank, saddle and sidecar to attach.
Adrian
'53 Plunger Flash, Steib S500.


Online JulianS

  • 1962 A10
  • Resident Legend
  • *****
  • Join Date: Mar 2017
  • Posts: 915
  • Karma: 19
Re: Headlamp shell light switch
« Reply #1 on: 14.07. 2019 13:55 »
This may help.

Online AdrianJ

  • A's Best Friend
  • ***
  • Join Date: Oct 2018
  • Posts: 139
  • Karma: 1
Re: Headlamp shell light switch
« Reply #2 on: 14.07. 2019 15:04 »
Thanks Julian.
It'll now be a day or two before I try it. Sidecar fitting is not going well with just one person. Lifting and tightening at the same time is not easy :-)
Adrian
'53 Plunger Flash, Steib S500.


Offline Swarfcut

  • Resident Legend
  • *****
  • Join Date: Oct 2018
  • Posts: 810
  • Karma: 12
Re: Headlamp shell light switch
« Reply #3 on: 14.07. 2019 16:25 »
Adrian, If your bike has the diver's helmet, you may find the switch knob tail fouls on the cowl where the pressing turns out to cover the fork shroud. I am led to believe the switch comes as a short or long knob type.

 I didn't know this long ago, and just cut away one of the switch locating tabs on the cowl, to turn the switch body slightly. Not noticed, but it would have been better in retrospect to obtain the correct knob. That was then, now you are spoilt for choice.

 A thin rubber ring goes between the underside of the switch and the cowl. Julian's picture shows the clip, which engages in slots moulded into the switch body parallel to the switch face.

 Swarfy.

Online AdrianJ

  • A's Best Friend
  • ***
  • Join Date: Oct 2018
  • Posts: 139
  • Karma: 1
Re: Headlamp shell light switch
« Reply #4 on: 14.07. 2019 17:58 »
Hi Swarfy,
Yes i thought I'd ordered a new switch with short handle, but sure enough it fouled when
I mounted it. I cut it down with a hacksaw and polished it - looks fine now.
I'm missing the rubber ring but I think I'll get away with an elastic band or make one out of an inner tube.
Adrian
'53 Plunger Flash, Steib S500.


Online AdrianJ

  • A's Best Friend
  • ***
  • Join Date: Oct 2018
  • Posts: 139
  • Karma: 1
Re: Headlamp shell light switch
« Reply #5 on: 17.07. 2019 11:33 »
Still can't get the clip to hold, so I've mounted the switch with silicone sealant.
I think it may be a badly manufactured switch with little or no groove for the clip to hold.
Remains to be seen if it works when it's cured.
Adrian.
'53 Plunger Flash, Steib S500.


Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 5681
  • Karma: 30
Re: Headlamp shell light switch
« Reply #6 on: 17.07. 2019 11:54 »
Still can't get the clip to hold, so I've mounted the switch with silicone sealant.
I think it may be a badly manufactured switch with little or no groove for the clip to hold.
Remains to be seen if it works when it's cured.
Adrian.
Would it be possible to enlarge the groove in the plastic, using a rat-tail file?

Online AdrianJ

  • A's Best Friend
  • ***
  • Join Date: Oct 2018
  • Posts: 139
  • Karma: 1
Re: Headlamp shell light switch
« Reply #7 on: 17.07. 2019 14:34 »
That may well work, there is only one shallow groove, I may have to cut another.
I'll wait to see if the sealant works - it'll take a couple of days to cure, still everything has to go into abeyance for a week on Friday when I'm off on holiday - no bike!
Adrian
'53 Plunger Flash, Steib S500.


Offline manxman

  • Moving Up
  • **
  • Join Date: Jul 2017
  • Posts: 38
  • Karma: 1
Re: Headlamp shell light switch
« Reply #8 on: 08.08. 2019 21:03 »
Can anyone tell me the correct lucas number for the switch ? 1953  A10 with headlight shroud.

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 5681
  • Karma: 30
Re: Headlamp shell light switch
« Reply #9 on: 08.08. 2019 21:13 »
Can anyone tell me the correct lucas number for the switch ? 1953  A10 with headlight shroud.
If you don't have a parts list try Draganflys website