Author Topic: '56-57 rear sprocket studs  (Read 750 times)

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8111
  • Karma: 106
  • Lake Conjola NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
'56-57 rear sprocket studs
« on: 20.08. 2009 10:53 »
G'day all,
            I need to replace the studs in my Ariel type hub. I see their held in by scotch keys (pins down the side of the stud). Are they a straight pin or threaded ? There is a small hole inside the hub at where I think the pin is, but have broken 2 pin punches trying to punch them out. Any suggestions.
Cheers
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, .
Australia
Muskys Plunger A7

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8111
  • Karma: 106
  • Lake Conjola NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: '56-57 rear sprocket studs
« Reply #1 on: 04.09. 2009 10:21 »
G'day all,
            I got'em out. The pins are 1/8" diam X 3/8" long. I drilled 3/32" down the pin and collapsed them, then unscrewed the studs. Hope this helps anyone else with these hubs.
Cheers
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, .
Australia
Muskys Plunger A7