Author Topic: Stencil for "BSA" on license plate holder  (Read 273 times)

Offline azcaveman

  • Moving Up
  • **
  • Join Date: Aug 2020
  • Posts: 21
  • Karma: 0
  • Retired techo geek
Stencil for "BSA" on license plate holder
« on: 15.09. 2021 02:18 »
This is for anyone who may want a stencil to spray paint the BSA logo on a license plate holder. I made an outline drawing from a decal and taped it onto some contact paper and then cut it out with an exacto knife. Then I carefully stuck the contact paper to the black paint before hitting it with yellow spray paint.
It was tricky to place the centers of the "B" and "A" but I was pretty happy with the results. The original paint job had a red outline so I doubled up the inside lines for anyone wanting to add the red paint.