Author Topic: auto electritian wanted in glasgow(eastkilbride)HELP  (Read 1750 times)

Offline bezabill

  • A's Good Friend
  • ***
  • Join Date: Nov 2008
  • Posts: 72
  • Karma: 1
can any one help it is to wire a b31( the lot!!!)

Offline LJ.

  • Peterborough UK.
  • Wise & Enlightened
  • *
  • Join Date: Jun 2006
  • Posts: 1403
  • Karma: 15
  • The Red A10!
    • LJ's Website!
Re: auto electritian wanted in glasgow(eastkilbride)HELP
« Reply #1 on: 26.02. 2010 21:28 »
You could manage that Bill, not hard to do if you buy a good loom.
Ride Safely Lads! LJ.
**********************
1940 BSA M20 500cc Girder/Rigid- (SOLD)
1947 BSA M21 600cc Girder/Rigid-Green
1949 BSA A7   500cc Girder/Plunger Star Twin-(SOLD)
1953 BSA B33  500cc Teles/Plunger-Maroon
1961 BSA A10  650cc Golden Flash-Blue
1961 BSA A10  650cc Golden Flash-Red

Offline bezabill

  • A's Good Friend
  • ***
  • Join Date: Nov 2008
  • Posts: 72
  • Karma: 1
Re: auto electritian wanted in glasgow(eastkilbride)HELP
« Reply #2 on: 26.02. 2010 21:42 »
hav you ever felt you cant do anymore or lost the will !! but i do have a new braided loom*problem* *how do i attach one off those new type off 6volt regulator rectifier,s mmmmm help

Online chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 4026
  • Karma: 54
Re: auto electritian wanted in glasgow(eastkilbride)HELP
« Reply #3 on: 26.02. 2010 23:08 »
Hi Bill,
If you have a "6volt regulator rectifier" you have the wrong gizmo!

You need a 6 volt regulator, there should be an information diagram with this when you buy it??

There are only 4 wires, your new loom will have colours matching the original BSA wiring diagram
FADE
the new regulator will have similar markings (maybe different colours)
its just a matter of pairing up the correct wires, you can join them with crimp connecters or male/female spade or bullet connectors

HTH
JohnO R
1961 Super Rocket
1963 RGS (ongoing)

Online groily

  • Wise & Enlightened
  • *
  • Join Date: Jul 2007
  • Posts: 1849
  • Karma: 31
    • www.brightsparkmagnetos.com
Re: auto electritian wanted in glasgow(eastkilbride)HELP
« Reply #4 on: 02.03. 2010 17:39 »

As stated, unless you have an alternator B31, you don't want a regulator rectifier. You need a dynamo voltage regulator and there is no better than Manormike's DVR2 as many members here can testify. However, if you do have a late engine in there with an alternator (and coil ignition), then you might well need a reg/rect and the Podtronics unit available from Paul (Norbsa) Goff is perfect. 6v ones cost twice what 12v ones cost though, and then you still can't buy 6v bulbs easily.

If you want a B31 wiring diagram, either dynamo or alternator, come back on here and stuff can be sorted. But even the basic Haynes cheapo lousy book has diagrams for both.
Best of luck.

Bill

Offline a10 gf

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Sep 2006
  • Posts: 3192
  • Karma: 57
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: auto electritian wanted in glasgow(eastkilbride)HELP
« Reply #5 on: 03.03. 2010 23:00 »
Chaterlea  ;)

FADE: Field, Amperemeter, Dynamo, Earth.


Stand with
A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Online chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 4026
  • Karma: 54
Re: auto electritian wanted in glasgow(eastkilbride)HELP
« Reply #6 on: 03.03. 2010 23:23 »
Hi, a10gf
You would think that after working as a spark for the last 35 years thai I would remember *idea* *idea*
Chaars
John
1961 Super Rocket
1963 RGS (ongoing)

Offline a10 gf

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Sep 2006
  • Posts: 3192
  • Karma: 57
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: auto electritian wanted in glasgow(eastkilbride)HELP
« Reply #7 on: 03.03. 2010 23:27 »
My memory FADE's sometimes as well...  *smile*


Stand with
A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"