« previous next »
Pages: [1]   Go Down

Author Topic: Plunger Chain Guard  (Read 1309 times)

Offline Stu55Flash

  • A's Good Friend
  • ***
  • Join Date: Feb 2010
  • Posts: 201
  • Karma: 3
    • Flash Resto
Plunger Chain Guard
« on: 12.06. 2010 12:32 »
Hi Folks

I was short of a chain guard and now I've ended up with 2! Looking at my Dragonfly catalogue they are both for the plunger. They are slightly different however. From the picture the chain enclosure is larger on one. Can anyone shed any light on this? I have yet to fabricate a lower fixing plate for the yellow one.

Thanks Stu

Logged
"Keep a distance from lady "L" drivers in cars. Some are not mechanically minded, are slow to acquire road sense, an are apt to panic..." The Pitman Book of the BSA Twins.
Golden Flash Plunger 1955, Francis Barnett Falcon 67 1954, Ferguson TEA Tractor 1951. Looking for another project!

Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3189
  • Karma: 71
Re: Plunger Chain Guard
« Reply #1 on: 13.06. 2010 00:40 »
Stu,
            Possibly the larger cut away is for the larger sprockets as for sidecar use.
Another difference which may be found is that the early type did not have pump brackets on top as the pump was held under the tank.
                                  Trev.
Logged
Pages: [1]   Go Up
« previous next »