Author Topic: K2F Armature Schematic  (Read 2208 times)

Offline dpaddock

  • NC, USA
  • Valued Contributor
  • ****
  • Join Date: Jul 2006
  • Posts: 429
  • Karma: 5
K2F Armature Schematic
« on: 14.06. 2010 14:32 »
Does anyone have a wiring schematic of the Lucas K2F magneto armature?

David
David
'57 Spitfire


Online Triton Thrasher

  • Scotland
  • Wise & Enlightened
  • *
  • Join Date: Feb 2009
  • Posts: 1461
  • Karma: 20
Re: K2F Armature Schematic
« Reply #1 on: 14.06. 2010 21:41 »
One end of the LT goes to the armature yoke. The other end goes to the screw that holds the points plate on, with the condenser bridging that connection to the yoke. The yoke is earthed to the engine by the earth brush.

One end of the HT goes to the slip ring. The other to the yoke.

Have I got that right?

Online groily

  • Wise & Enlightened
  • *
  • Join Date: Jul 2007
  • Posts: 1050
  • Karma: 17
    • www.brightsparkmagnetos.com
Re: K2F Armature Schematic
« Reply #2 on: 15.06. 2010 07:15 »
David, you could look at www.brufnut/de/WORKSHOP/LUCAS/lucas.htm which might help as the pix there show pretty much everything. Some guy! Otherwise, the Lucas service sheets are semi-helpful, especially the one on remagnetising.
Bill