« previous next »
Pages: [1]   Go Down

Author Topic: tech tips  (Read 1285 times)

Offline andy2565

  • A's Good Friend
  • ***
  • Join Date: May 2010
  • Posts: 167
  • Karma: 0
tech tips
« on: 09.08. 2010 13:49 »
i just found this site,maybe people have seen it before,may have a go at a couple of the mods,but struggling to find a local engineer to do the end feed conversion,theyre all to busy,would rather do it local rather than srm.
http://bsa-a10.hailwood.com/index.html
Logged
near wolves uk,will keep riding as long as can stay upright,tribsa,tt500,2xJAP grasstrackers+jawa.gold flash.triumph metisse,and others.

Offline muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 11456
  • Karma: 137
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: tech tips
« Reply #1 on: 09.08. 2010 21:32 »
G'day Andy,
                    Beeza Bill (RIP) was an ingenious man, I spoke to him a few times but never met. I had his conversion on my '57 racer. The only problem I had was blowing out the oil seal in the quill, so I replaced it with a bush. I have yet to convert the cafe or the '51 but will in time.
Cheers
Logged
'51 A7 plunger, '57 A7SS racer now a A10CR,  '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Offline mikethebrush

  • A's Good Friend
  • ***
  • Join Date: Jun 2010
  • Posts: 83
  • Karma: 2
  • pre restoraton
Re: tech tips
« Reply #2 on: 09.08. 2010 21:42 »
I found that site some time ago and found it really interesting
Logged
1959 BSA A7 SHOOTING STAR
Pages: [1]   Go Up
« previous next »