Author Topic: VReg 11 regulator  (Read 1423 times)

Offline LJ.

  • Peterborough UK.
  • Wise & Enlightened
  • *
  • Join Date: Jun 2006
  • Posts: 1403
  • Karma: 15
  • The Red A10!
    • LJ's Website!
VReg 11 regulator
« on: 20.11. 2007 18:22 »
The V-Reg 11 Regulator is indeed a very good Reg. I have one on each of my bikes, you fit and forget! I bought both from Alan Osbourne at AO Services

Cant remember how much I paid for them, but the website will more than likely show the prices. Another useful gadget that I purchased from him, and that is a battery status monitor, this will show the state of charge held in your battery and the output of the dynamo. Very useful and a peace of mind.
Ride Safely Lads! LJ.
1940 BSA M20 500cc Girder/Rigid- (SOLD)
1947 BSA M21 600cc Girder/Rigid-Green
1949 BSA A7   500cc Girder/Plunger Star Twin-(SOLD)
1953 BSA B33  500cc Teles/Plunger-Maroon
1961 BSA A10  650cc Golden Flash-Blue
1961 BSA A10  650cc Golden Flash-Red

Offline a10gf

  • Wise & Enlightened
  • *
  • Join Date: Sep 2006
  • Posts: 2924
  • Karma: 45
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
VReg 11 regulator
« Reply #1 on: 21.11. 2007 09:10 »
(This topic was moved to tech, original question by Vincent)
we are going to fit a VReg 11 regulator ..any thoughts on these regulators..

I see they have both 6 & 12 v versions that fit inside a mcr box. Suppose there is no heat problems even if enclosed in a small box?

A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"