« previous next »
Pages: [1]   Go Down

Author Topic: Regulator Box  (Read 2058 times)

Offline Buster1450

  • Moving Up
  • **
  • Join Date: Dec 2010
  • Posts: 31
  • Karma: 0
Regulator Box
« on: 13.01. 2011 10:04 »
Hi Chaps
 Could someone tell me if the regulator box on an A10 be isolated from the earthed frame of the bike?

Cheers,
Logged

Offline LJ.

  • Peterborough UK.
  • Wise & Enlightened
  • *
  • Join Date: Jun 2006
  • Posts: 1403
  • Karma: 15
  • The Red A10!
    • LJ's Website!
Re: Regulator Box
« Reply #1 on: 13.01. 2011 10:13 »
Hi Buster... No, it is not isolated at all and I can see why you ask that. The rubber bushes on either side of the regulator are there to act as a cushioning effect and not as an isolator.
Logged
Ride Safely Lads! LJ.
**********************
1940 BSA M20 500cc Girder/Rigid- (SOLD)
1947 BSA M21 600cc Girder/Rigid-Green
1949 BSA A7   500cc Girder/Plunger Star Twin-(SOLD)
1953 BSA B33  500cc Teles/Plunger-Maroon
1961 BSA A10  650cc Golden Flash-Blue
1961 BSA A10  650cc Golden Flash-Red

Offline lawnmowerman

  • Resident Legend
  • *****
  • Join Date: Dec 2009
  • Posts: 624
  • Karma: 8
  • 1959 Super Rocket. Kent, England
Re: Regulator Box
« Reply #2 on: 13.01. 2011 12:12 »
There was a topic during the last week where the advice was that the frame of the regulator is not earthed to the frame and is at a floating potential - maybe the rubber mounts serve the purpose of insulating the reg frame from the bike frame and also insulate from vibration.

Jim
Logged
1959 A10 SR
1938 Wolseley 14/60
1955 Ferguson TEF20 tractor
1965 Ferguson 135 tractor
1952 Matchless G80 rigid
1960 BMW R60
1954 Matchless G80S
1955 Ariel 500 VH
1951 Sunbeam S7DL
1960 Matchless G12 with Watsonian Monza
......and loads of lawnmowers

Too old to Rock and Roll but too young to die  (Jethro Tull 1976)

Offline fido

  • Ferdinandovac, Croatia
  • Resident Legend
  • *****
  • Join Date: Aug 2006
  • Posts: 712
  • Karma: 9
Re: Regulator Box
« Reply #3 on: 13.01. 2011 13:36 »
I can't see any advantage to isolating it. I would have thought the earthed metal screening would help prevent the bike from causing interference on radios and tellies.
Logged

Offline Buster1450

  • Moving Up
  • **
  • Join Date: Dec 2010
  • Posts: 31
  • Karma: 0
Re: Regulator Box
« Reply #4 on: 13.01. 2011 16:39 »
Quote from: lawnmowerman on 13.01. 2011 12:12
There was a topic during the last week where the advice was that the frame of the regulator is not earthed to the frame and is at a floating potential - maybe the rubber mounts serve the purpose of insulating the reg frame from the bike frame and also insulate from vibration.

Jim

Thats the reason i asked the question as not sure myself.
Logged

Online trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3189
  • Karma: 71
Re: Regulator Box
« Reply #5 on: 13.01. 2011 21:16 »
The rubber mounts were only introduced with the RB107 regulator.
The early MCR1 & MCR2 were bolted to the frame with no rubber cushion.
The "frame" or "chassis" of the regulator is directly connected to the "D" output of the generator.
Trev.
Logged

Offline Stu55Flash

  • A's Good Friend
  • ***
  • Join Date: Feb 2010
  • Posts: 201
  • Karma: 3
    • Flash Resto
Re: Regulator Box
« Reply #6 on: 13.01. 2011 21:28 »
I'm reading the question differently; the floating regulator frame is connected to the 'D' terminal on the dynamo. The regulator frame is not connected to the bike chassis. It should be electrically insulted in the regulator.

Stu
Logged
"Keep a distance from lady "L" drivers in cars. Some are not mechanically minded, are slow to acquire road sense, an are apt to panic..." The Pitman Book of the BSA Twins.
Golden Flash Plunger 1955, Francis Barnett Falcon 67 1954, Ferguson TEA Tractor 1951. Looking for another project!

Offline wilko

  • Resident Legend
  • *****
  • Join Date: Mar 2010
  • Posts: 681
  • Karma: 4
Re: Regulator Box
« Reply #7 on: 13.01. 2011 22:31 »
The reg can be solidly mounted if you want it that way which tells you it doesn't matter if the body touches or not. There is a separate earth wire marked "E" anyway .
Logged

Online RichardL

  • Outside Chicago, IL
  • Wise & Enlightened
  • *
  • Join Date: Nov 2007
  • Posts: 6386
  • Karma: 55
Re: Regulator Box
« Reply #8 on: 14.01. 2011 00:08 »
Not going into the isolation question, don't need my 2p on that point.However, regarding screening, don't get confused. There is not enough current cursing through the regulator (as is present in the plug wires when the magneto dumps its load once a revolution) to cause the kind of electromagnetic field necessary for electromagnetic interference in radios. Even if there were, the aluminum regulator cap affords no shielding to electromagnetic waves, being non-ferrous. Now then, I believe the spark itself is another issue. I think it is a source of mostly electrostatic energy, which can be shielded by aluminum.

I know. "So, what?" and "Who cares?"

Richard L.
Logged

Online Triton Thrasher

  • Scotland
  • Wise & Enlightened
  • *
  • Join Date: Feb 2009
  • Posts: 1928
  • Karma: 23
Re: Regulator Box
« Reply #9 on: 14.01. 2011 07:57 »
A car dynamo could certainly cause interference on that car's radio.
Logged
Pages: [1]   Go Up
« previous next »