Author Topic: clutch issue  (Read 1699 times)

Offline mayes

  • Moving Up
  • **
  • Join Date: Mar 2013
  • Posts: 42
  • Karma: 0
clutch issue
« on: 18.03. 2013 22:48 »
it has been very long time since i had an A10 I have just brought a distressed 1955 golden flash on some work getting it running I found a oil leak from the primary rear chain case coming from the rear having striped down there is no shock assober fitted is this right ?.also there seems a cap between the gear  shaft and clutch any help would be welcome Thanks John old
bike running in rider running out
Tri 500 5Ta
B.S.A A10 1955 Under restoration

Online KiwiGF

  • Last had an A10 in 1976, in 2011 it was time for my 2nd one. It was the project from HELL (but I learned a lot....)
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 1933
  • Karma: 17
Re: clutch issue
« Reply #1 on: 19.03. 2013 05:28 »
 I reckon it should have a cush drive, i suggest you look around for a parts book as that will help you work out whats missing etc, but draganfly has a good site with diagrams etc in the meantime. Ref the gap any chance of a pic? These bikes often leak where the gearbox shaft enters the chain case there is a diamond shaped sliding plate affair which does not do  good job of keeping oil in the case!
New Zealand

1956 A10 Golden Flash  (1st finished project)
1949 B31 rigid “400cc”  (2nd finished project)
1968 B44 Victor Special (3rd finished project)
2001 GL1800 Goldwing, well, the wife likes it
2009 KTM 990 Adventure, cos it’s 100% nuts

Online morris

  • Wise & Enlightened
  • *
  • Join Date: Aug 2012
  • Posts: 1764
  • Karma: 27
  • Antwerp, Belgium
Re: clutch issue
« Reply #2 on: 19.03. 2013 20:48 »
Hi John,

Concerning the cush drive, possible you have a conversion to the cush drive type clutch.
This website may be of some help to determine what you've got.
It's got all the parts in pictures, so its easy to compare.

http://www.degroot-bsa.nl/index.php
'58 BSA A 10 SA
'52 BSA A 10 Plunger
'55 MORRIS ISIS
The world looks better from a motorbike
Belgium

Online KiwiGF

  • Last had an A10 in 1976, in 2011 it was time for my 2nd one. It was the project from HELL (but I learned a lot....)
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 1933
  • Karma: 17
Re: clutch issue
« Reply #3 on: 19.03. 2013 23:13 »
To ensure there is no confusion, the cush drive I was referring to in my earlier post is the one fitted (or that should be fitted  - on a std bike) on the drive side of the crankshaft.

Some clutches may have "shock absorbers" or cush drives as part of their design, if a clutch has a shock absorber as part of it's design I do not know if that means the cush drive on the crank is no longer required. A parts book, possibly from a different model would help here.

Fitting a non std clutch is fairly common on A10's, the most popular conversion seems to be to fit a 4 spring "Triumph" clutch which was std on later bikes, usually fitted in place of the much maligned "6 spring" clutch (which I have in my bike by the way).

Pics will help identify what you have.  Both older and newer original parts from other models will could have been fitted, some bikes had duplex primary chains, some had alternators etc.




New Zealand

1956 A10 Golden Flash  (1st finished project)
1949 B31 rigid “400cc”  (2nd finished project)
1968 B44 Victor Special (3rd finished project)
2001 GL1800 Goldwing, well, the wife likes it
2009 KTM 990 Adventure, cos it’s 100% nuts

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5720
  • Karma: 66
Re: clutch issue
« Reply #4 on: 20.03. 2013 09:11 »
It is often said (could be myth) that a clutch with cush (rubber inserts ) centre should not be used with a bike with crankshaft cush as they fight each other  *fight*, on one hand there is some logic to it on the other hand difficult to prove.
I don't know for sure so I'm open to suggestion - was the rubber cush centre intended for bikes with an alternator as maybe they don't have the crank cush

I'm thinking out of the envelope here (see more cool speak)
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 41
Re: clutch issue
« Reply #5 on: 20.03. 2013 14:56 »
 I'm no expert on the clutches, other than I'm not a fan of the early S/A 6 spring, but do like the Plunger 6Sp., and am fairly sure that I've seen reference to the Alternator models that suggest as you(Bill)do that they need to run cush in the clutch- out of desperation I fairly sure I actually grafted a clutch from a M20 onto my Road Rocket back in the '70's when bits were hard to find- from memory worked a treat!
 Happy duelin' Bill- maybe try it with Banjo.? ;~)
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Offline bikerbob

  • Resident Legend
  • *****
  • Join Date: Feb 2011
  • Posts: 680
  • Karma: 8
Re: clutch issue
« Reply #6 on: 20.03. 2013 15:32 »
bsa-bill. I had a gold flash that had the cush drive on the crankshaft and also I fitted a 4 spring Triumph clutch with the rubber inserts I had that bike for 16 years with that arragement and no problems.
56 A7 s/a
63 A65

Offline A10 JWO

  • Resident Legend
  • *****
  • Join Date: Oct 2012
  • Posts: 730
  • Karma: 2
Re: clutch issue
« Reply #7 on: 20.03. 2013 15:38 »
John
I think that someone has put far too much oil in you bike causing it to splash out behind the clutch, check your levels correctly. Please let me know how you get on. Whilst you have it stripped you may as well fit new clutch plates and roller bearings if required.

Regards Colin

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5720
  • Karma: 66
Re: clutch issue
« Reply #8 on: 20.03. 2013 15:44 »
Quote
Triumph clutch with the rubber inserts I had that bike for 16 years with that arragement and no problems.

Hi Bob - yes I can't see too much of a problem (hence the myth bit) but it one of those thing you hear said quite often
Wonder what Triumph used them on, I have one but there's a bit off play on the centre so I replaced it with an open centre one, I bought the whole clutch off the Evil place so it possibly came off a Triumph.

Hoped someone might know where they were originally fitted
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3184
  • Karma: 71
Re: clutch issue
« Reply #9 on: 20.03. 2013 20:14 »
Bill,
      The rubber cush clutches were fitted to alternator models, both BSA & Triumph.

Trev.

Offline mayes

  • Moving Up
  • **
  • Join Date: Mar 2013
  • Posts: 42
  • Karma: 0
Re: clutch issue oil from rear case
« Reply #10 on: 23.03. 2013 15:23 »
the problem was to much oil i.e 3 times to much there seem's that some early data stated 7/8 of a pint wrong thanks all
bike running in rider running out
Tri 500 5Ta
B.S.A A10 1955 Under restoration

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5720
  • Karma: 66
Re: clutch issue
« Reply #11 on: 23.03. 2013 17:14 »
Quote
The rubber cush clutches were fitted to alternator models, both BSA & Triumph.
Cheers Trev I wondered if that was the case or only case
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco