View or Hide Header -->
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
This topic
This board
A7 & A10 Engine
A7 1946-1950
Gearbox, Clutch, Primary
Frame
Lucas, Ignition, Charging, Electrical
Amal, Carburation
Entire forum
Google
Home
Help
Search
Contact
Login
Register
The BSA A7-A10 Forum
»
Technical (Descriptive Topic Titles - Stay on Topic)
»
Frame
»
Tools for forks
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Tools for forks (Read 1320 times)
ShaunMac
A's Good Friend
Join Date: Feb 2013
Posts: 128
Karma: 1
Tools for forks
«
on:
06.05. 2014 17:08 »
Hi all,
I'm hoping to save some money by making my own tools for working on the front forks. I've hogan old cap to make a puller but I was wondering is anyone had the dimensions and maybe a picture of the end of the tool for removing the nut for stripping forks?
Cheers,
Shaun
Logged
61 Super Rocket swing-arm
Billybream
Resident Legend
Join Date: Jan 2012
Posts: 651
Karma: 8
Re: Tools for forks
«
Reply #1 on:
06.05. 2014 19:53 »
Hi Shaun.
Do you mean a tool to remove the oil seal holders from the fork leg. A good quality strap wrench might help, but I have made a tool from hollow tube with id to clear fork inner tube and od to fit inside seal holder. The tool then has a pair of tangs or dogs to locate into the slots at the bottom of the seal holder. The tool is then finished off with two tapped holes at the top to enable bolts to fastenen to aid turning during dis-assembly and re-assembly.
If you would like some dimensions of the tool please advise.
Logged
1960 Super Rocket, owned since 1966, back on the road 2012 after being laid up for 29yrs.
ShaunMac
A's Good Friend
Join Date: Feb 2013
Posts: 128
Karma: 1
Re: Tools for forks
«
Reply #2 on:
06.05. 2014 20:14 »
That's the one.
Some dimensions would be great.
Thanks.
Logged
61 Super Rocket swing-arm
Billybream
Resident Legend
Join Date: Jan 2012
Posts: 651
Karma: 8
Re: Tools for forks
«
Reply #3 on:
07.05. 2014 19:47 »
Hi Shaun.
OD = 1" 7/8
ID = 1" 1/2
Overall length of tool = 9" 1/2
Two tapped holes on centre line 1" 1/4 from top, I used 5/16" whit bolts as handles.
Dogs or Tangs are off the centre line, 1/8" thick x 3/8" long x 3/16" deep. So basically reduce OD @ end to 1" 5/8 x 3/16" length, and produce tang to 3/8" width.
Logged
1960 Super Rocket, owned since 1966, back on the road 2012 after being laid up for 29yrs.
bsa-bill
Wise & Enlightened
Join Date: Mar 2006
Posts: 5720
Karma: 66
Re: Tools for forks
«
Reply #4 on:
07.05. 2014 19:55 »
Made two or three of these and my mates made a couple, never strong enough tabs on them, possibly our engineering skills are lacking something, best thing I did was buy the purpose made tool, it's worked 100% every time I've used it
Logged
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up would have seizure if taken to Tesco
Butch (cb)
Wise & Enlightened
Join Date: Aug 2010
Posts: 1691
Karma: 16
Re: Tools for forks
«
Reply #5 on:
08.05. 2014 12:32 »
I've done the same kind of thing for a Guzzi g/box. I bought a box spanner of about the right size and then built up some tangs on one end with a welder. Left me with a useful hex at the other end to get a spanner on.
Logged
Warning - observations made by this member have a 93% unreliability rating.
Of Bikes; various, including ...
'58 S/Arm Iron Head Flash Bitza
duTch
Ricketty Rocketty Golden Flashback
Wise & Enlightened
Join Date: Oct 2011
Posts: 4528
Karma: 41
Re: Tools for forks
«
Reply #6 on:
08.05. 2014 15:26 »
Some piccies would be good- I don't have a need for eh fork tool, but surely someone will, but I do have a Gutzzi box I need to dissect ....cycloB....?
Logged
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia
Butch (cb)
Wise & Enlightened
Join Date: Aug 2010
Posts: 1691
Karma: 16
Re: Tools for forks
«
Reply #7 on:
08.05. 2014 17:47 »
I can feel a moderator breathing down my neck - might be a little too far off piste on this now. I'll see if I can turn it up amongst the detritus in the garage and then PM you. Happy to send it out on loan but would want it returned as I have aspirations for another big round barrel.
Logged
Warning - observations made by this member have a 93% unreliability rating.
Of Bikes; various, including ...
'58 S/Arm Iron Head Flash Bitza
Billybream
Resident Legend
Join Date: Jan 2012
Posts: 651
Karma: 8
Re: Tools for forks
«
Reply #8 on:
08.05. 2014 18:22 »
Please find link to Fork Service Sheet.
http://www.bsawiki.com/index.php%3Ftitle%3DChapter11
Logged
1960 Super Rocket, owned since 1966, back on the road 2012 after being laid up for 29yrs.
Butch (cb)
Wise & Enlightened
Join Date: Aug 2010
Posts: 1691
Karma: 16
Re: Tools for forks
«
Reply #9 on:
08.05. 2014 21:45 »
Box spanner for big twin Guzzi g/box.
Logged
Warning - observations made by this member have a 93% unreliability rating.
Of Bikes; various, including ...
'58 S/Arm Iron Head Flash Bitza
The Artful Bodger
Moving Up
Join Date: Dec 2013
Posts: 31
Karma: 3
Re: Tools for forks
«
Reply #10 on:
08.05. 2014 23:07 »
I was watching this post as my Ariel forks were leaking, well one side anyway. Tackling the job today I have made the seal tool and a "draw up plug". Just removing the forks from the yokes is easy enough but couldn't get them back up as the stanchion just drops back inside the leg as it all gets pushed up. The plug (3/4" dia screw cut to 20 TPI.) screws into the top of the stanchion and the 10 mm thread is grab-able to wind it up into the yokes so the top bolt can be screwed in.
Colin
Logged
duTch
Ricketty Rocketty Golden Flashback
Wise & Enlightened
Join Date: Oct 2011
Posts: 4528
Karma: 41
Re: Tools for forks
«
Reply #11 on:
09.05. 2014 01:23 »
Yup CycloB., maybe should be in 'Home-made tools', but will finish the diversion-if that's ok?-
will likely make one from some 1-1/2" tube (1,3/8"-35mm ID) I have- made one similar for my (conical) front wheel bearing retainer but lugs are round and a bit further out as per photo that's the round nut in the end...
Cheers
Logged
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia
Print
Pages: [
1
]
Go Up
« previous
next »
The BSA A7-A10 Forum
»
Technical (Descriptive Topic Titles - Stay on Topic)
»
Frame
»
Tools for forks