« previous next »
Pages: [1]   Go Down

Author Topic: Replace Wheel Spokes  (Read 763 times)

Offline Terryb

  • Beezerban
  • A's Good Friend
  • ***
  • Join Date: Feb 2014
  • Posts: 182
  • Karma: 1
  • Bikes Owned:
Replace Wheel Spokes
« on: 20.10. 2014 17:12 »
Hi,

Has anybody any experience in replacing the odd spoke in a front or rear wheel? Is it possible, with disturbing the other spokes?
Logged

Offline bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5715
  • Karma: 67
Re: Replace Wheel Spokes
« Reply #1 on: 20.10. 2014 18:16 »
straight pull spokes should be fine
Logged
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Online KiwiGF

  • Last had an A10 in 1976, in 2011 it was time for my 2nd one. It was the project from HELL (but I learned a lot....)
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 2009
  • Karma: 17
Re: Replace Wheel Spokes
« Reply #2 on: 20.10. 2014 23:45 »
On hubs with a spoke flange  a new spoke can usually be fitted without bending etc.....these flanges are on the early half width 7 inch braked front wheels
Logged
New Zealand

1956 A10 Golden Flash  (1st finished project)
1949 B31 rigid “400cc”  (2nd finished project)
1968 B44 Victor Special (3rd finished project)
2023 Honda CRF300 Rally (for sensible days)
2009 KTM 990 Adventure (for crazy days)

Offline Terryb

  • Beezerban
  • A's Good Friend
  • ***
  • Join Date: Feb 2014
  • Posts: 182
  • Karma: 1
  • Bikes Owned:
Re: Replace Wheel Spokes
« Reply #3 on: 22.10. 2014 18:55 »
Hi Guy's, many thanks for the replies. It looks like the rear hub has straight pull spokes, but the front, which has a 8" half width brake, might be a problem.
Logged
Pages: [1]   Go Up
« previous next »