« previous next »
Pages: [1]   Go Down

Author Topic: How do I adjust my TLS brake?  (Read 784 times)

Offline Dean

  • A's Good Friend
  • ***
  • Join Date: Dec 2013
  • Posts: 131
  • Karma: 4
How do I adjust my TLS brake?
« on: 19.03. 2017 11:47 »
I am now ready to assemble the TLS on my A10. The machining and welding is done so lets hope it all lines up!

For now though I need to know how to adjust the brake arms to be sure its operating as a TLS and get optimal performance.
Intuitively I am assuming that with the rod that links both brake arms disconnected I operate both brake arms fully manually and then and with my third and fourth hands adjust the linking rod.

Does anyone know of a better approach or the BSA recommended method?
Logged
Never tell people your troubles. Half of them are not interested and the other half are glad you're getting what's coming to you.

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 42
Re: How do I adjust my TLS brake?
« Reply #1 on: 19.03. 2017 12:25 »

 
Quote
Intuitively I am assuming that with the rod that links both brake arms disconnected I operate both brake arms fully manually and then and with my third and fourth hands adjust the linking rod.

 I think that's what I did when I had one o' them
Logged
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Offline Dean

  • A's Good Friend
  • ***
  • Join Date: Dec 2013
  • Posts: 131
  • Karma: 4
Re: How do I adjust my TLS brake?
« Reply #2 on: 19.03. 2017 12:34 »
Cheers Dutch.
I suppose I've got to ask the cheeky question. Did it work!
Logged
Never tell people your troubles. Half of them are not interested and the other half are glad you're getting what's coming to you.

Offline ellis

  • Valued Contributor
  • ****
  • Join Date: Feb 2016
  • Posts: 434
  • Karma: 4
Re: How do I adjust my TLS brake?
« Reply #3 on: 19.03. 2017 15:39 »
That method worked for me and when the shoes bedded in it turned out better than I anticipated.    *smile*

ELLIS
Logged

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 42
Re: How do I adjust my TLS brake?
« Reply #4 on: 19.03. 2017 21:15 »

 
Quote
Cheers Dutch.
I suppose I've got to ask the cheeky question. Did it work!

 I think so, but that was a long time ago *whistle*
Logged
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Offline Dean

  • A's Good Friend
  • ***
  • Join Date: Dec 2013
  • Posts: 131
  • Karma: 4
Re: How do I adjust my TLS brake?
« Reply #5 on: 31.03. 2017 20:33 »
Well that was fun!
Reversed the bike out of the garage onto steep drive and no front brake!
Just managed to slow it on the rear while juggling to get us headed down hill. Very poor braking gong forward also!!
After about a mile with plenty of brake applications it improved and is now just about as good as the brake it replaced.
Hopefully it will get better with further bedding in, especially as I have not fitted new shoes by due to shotblasting of the drum could ot find witness marks to be sure I'd put them back in the same way rond they came out *red*
Logged
Never tell people your troubles. Half of them are not interested and the other half are glad you're getting what's coming to you.
Pages: [1]   Go Up
« previous next »