Author Topic: Tank fitting  (Read 699 times)

Offline Tone

  • Brighton UK
  • A's Best Friend
  • ***
  • Join Date: Nov 2008
  • Posts: 157
  • Karma: 0
Tank fitting
« on: 03.07. 2009 19:40 »
Hi All, Silly question but, where does the rubber cylindrical washer go, between the frame and tank? or under fixing nut and washer?
Good Advice
0
No reactions

Offline flashblack

  • West Devon, England
  • A's Best Friend
  • ***
  • Join Date: Feb 2009
  • Posts: 211
  • Karma: 1
  • 1959 golden flash
Re: Tank fitting
« Reply #1 on: 03.07. 2009 20:19 »
Hi Tone,
          It should go into the top of the tank and sit snugly in a recess underneath the washer and bolthead *smile*
                               cheers,
 
                                          Richie



   p.s. you also should have some rubber pads between the frame and tank.
Good Advice
0
No reactions
build it, ride it, live it!