Author Topic: Fork Shroud I.D.  (Read 301 times)

Offline Nourish

  • A's Best Friend
  • ***
  • Join Date: Aug 2013
  • Posts: 124
  • Karma: 0
Fork Shroud I.D.
« on: 30.11. 2019 16:13 »
I bought some fork shrouds today at the VMCC A/J for my Rigid A10 project, the vendor didn't know what they fitted - do you?
Good Advice
0
No reactions

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8433
  • Karma: 111
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Fork Shroud I.D.
« Reply #1 on: 30.11. 2019 19:29 »
G'day Nourish.
At first glance I'd say early A50/65 had the slotted hole for the h/light.
Cheers
Good Advice
0
No reactions
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7

Offline Nourish

  • A's Best Friend
  • ***
  • Join Date: Aug 2013
  • Posts: 124
  • Karma: 0
Re: Fork Shroud I.D.
« Reply #2 on: 05.12. 2019 18:36 »
 What is the length of the pre Unit twin shrouds?

P.S.  I can't find any pictures of an A50/A65 that doesn't have the headlight cowl or short headlamp bracket - none with long headlamp brackets/shrouds
Good Advice
0
No reactions

Offline bikerjohndavies

  • John Davies, Bath, UK
  • A's Best Friend
  • ***
  • Join Date: Jun 2010
  • Posts: 232
  • Karma: 3
  • 1953 BSA A10 Super Flash Project
Re: Fork Shroud I.D.
« Reply #3 on: 06.12. 2019 08:09 »
The A7/A10 shrouds are 15" long with a round hole. These were also used on the B and M series pre units as well. I think the shorter ones were used on the C11/C12 bikes but not sure about the slot rather than a round hole for the headlamp bolt. Might they be Triumph?
Good Advice
0
No reactions
1937 Panther M100 Rigid, 1946 Ariel Square 4, 1952 Norton Model 7, 1953 BSA A10SF (WIP), 1954 Ariel VH, 1961 Triumph T120R

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8433
  • Karma: 111
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Fork Shroud I.D.
« Reply #4 on: 06.12. 2019 08:25 »
Looks very much like these https://www.ebay.com/itm/372861872524
Cheers
Good Advice
0
No reactions
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7

Online JulianS

  • 1962 A10
  • Wise & Enlightened
  • *
  • Join Date: Mar 2017
  • Posts: 1043
  • Karma: 20
Re: Fork Shroud I.D.
« Reply #5 on: 06.12. 2019 09:32 »
I think from a C25 Barracuda or B44 from around 1967.

Parts 40 5183 and 40 5184

Shown as 13 1/4 long
Good Advice
0
No reactions