Author Topic: POR 15  (Read 505 times)

Offline A10 JWO

  • Resident Legend
  • *****
  • Join Date: Oct 2012
  • Posts: 728
  • Karma: 2
POR 15
« on: 19.02. 2020 15:32 »
Still playing with tanks: Tank is now ready for POR 15 before it goes to the painter. I noticed on the instructions that it must be left 96 hours to set. Does this mean before fuel can added ? The question I need answered, can the outside of the tank be prepped for paint whilst the stuff is going off. If so how long shall I leave it. Thank you.
Good Advice
0
No reactions

Offline scotty

  • Valued Contributor
  • ****
  • Join Date: Aug 2008
  • Posts: 415
  • Karma: 3
  • Deep Bay, Left Coast, Canada
Re: POR 15
« Reply #1 on: 19.02. 2020 19:48 »
Personally I would let it kick off fully as per instructions before doing anything else to the tank

but that’s just me.

I find patience with prepping and applying coatings is time well spent drinking an adult beverage

  *beer*
Good Advice
0
No reactions

Scotty

Current liabilities:
'56 A10 Red Flash
'54 B33
'98 HD FLHTPI
‘74 BMW R75-6

Offline a10gf

  • Wise & Enlightened
  • *
  • Join Date: Sep 2006
  • Posts: 2821
  • Karma: 42
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: POR 15
« Reply #2 on: 19.02. 2020 20:15 »
Agree with the above, remembering all the nice & timeconsuming work I've botched up by being entusiastically impatient not letting things dry\settle properly (paint, glue, concrete etc), ending up with lots of xtra work, headache & hassle, forced to redo things. Have learned ...until next time it happens :O)
Good Advice
0
No reactions

A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Online sean

  • A's Best Friend
  • ***
  • Join Date: Oct 2012
  • Posts: 65
  • Karma: 0
Re: POR 15
« Reply #3 on: 20.02. 2020 01:15 »
i use Casswell tank liner .....tank prep and  curing temps seem to be the most important thing to a successful outcome.
the longer you leave the product to dry thoroughly the better result you will have .
Good Advice
0
No reactions

Online BSA_54A10

  • Wise & Enlightened
  • *
  • Join Date: May 2008
  • Posts: 2030
  • Karma: 32
    • BSA National
Re: POR 15
« Reply #4 on: 20.02. 2020 04:10 »
The 96 hours is how long the chemical reaction takes to reach the end point.
You can do what you like before that time just so long as nothing goes inside the tank.
Good Advice
0
No reactions
Bike Beesa
Trevor

Online Black Sheep

  • Resident Legend
  • *****
  • Join Date: Apr 2017
  • Posts: 722
  • Karma: 6
    • Where black sheep live
Re: POR 15
« Reply #5 on: 20.02. 2020 07:07 »
Rule of thumb - rate of chemical reaction doubles for each 10 degrees K rise in temperature. That's why here in sunny Scotland you allow at least twice as long as recommended. 
Good Advice
0
No reactions
2 twins, 2 singles, lots of sheep

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 6379
  • Karma: 35
Re: POR 15
« Reply #6 on: 20.02. 2020 10:01 »
96 hours is only four days ; you must have other stuff to be getting on with.
Good Advice
0
No reactions

Offline A10 JWO

  • Resident Legend
  • *****
  • Join Date: Oct 2012
  • Posts: 728
  • Karma: 2
Re: POR 15
« Reply #7 on: 20.02. 2020 18:15 »
All points taken on board. I shall hide it in the airing cupboard behind my M/C batteries. Thanks lads.
Good Advice
0
No reactions

Online Jules

  • Valued Contributor
  • ****
  • Join Date: Mar 2011
  • Posts: 290
  • Karma: 0
  • 1956 A10 s/arm Golden Flash
Re: POR 15
« Reply #8 on: 21.02. 2020 00:32 »
that sounds like the days when I rebuilt my old Cortina engine in the loungeroom at home when I was "but a lad", and more to the point Mum let me do it!!! LOL..
Good Advice
0
No reactions

Online Bsareg

  • Valued Contributor
  • ****
  • Join Date: Mar 2016
  • Posts: 286
  • Karma: 2
Re: POR 15
« Reply #9 on: 21.02. 2020 09:54 »
I've used POR with great success several times . It does remind me of the original Hammerite in smell, look and feel (when dry) before they took all the nasties out.
Good Advice
0
No reactions
C11,B40,B44 Victor,A10,RGS,M21,Rocket3,REBSA

Offline Slymo

  • A's Best Friend
  • ***
  • Join Date: Jul 2018
  • Posts: 225
  • Karma: 3
Re: POR 15
« Reply #10 on: 22.02. 2020 20:58 »
You can work on the outside of the tank whilst the POR cures. Its a polyurethane finish and is assisted in its cure my mosture so the airing cupboard is probably the wrong thing. It also stinks to high heaven so possibly not good for domestic harmony either.
Good Advice
0
No reactions
NZ

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 6379
  • Karma: 35
Re: POR 15
« Reply #11 on: 23.02. 2020 09:24 »
I remember when I used POR15 the instructions said damp helps it set but someone, (here? ) denied that. That made me wonder if the formulation had changed.
Good Advice
0
No reactions

Offline A10 JWO

  • Resident Legend
  • *****
  • Join Date: Oct 2012
  • Posts: 728
  • Karma: 2
Re: POR 15
« Reply #12 on: 23.02. 2020 17:56 »
I had a look inside the tank today, I can see a couple of square inches that look a bit thin in a part of the tank that concerns me. I have some POR 15 left in the bottom of the tin. Can I give it another layer in this section with a paint brush that will reach ? Thanks lads. I am also experimenting with a spare piece of steel I dipped when I did the tank, just waiting to see if the second coat reacts.
Good Advice
0
No reactions

Offline Slymo

  • A's Best Friend
  • ***
  • Join Date: Jul 2018
  • Posts: 225
  • Karma: 3
Re: POR 15
« Reply #13 on: 25.02. 2020 00:04 »
You can if the paint hasn't started to go off yet. I've found that once you've opened the tin and the paint has been exposed to the atmosphere it isn't long until it goes off.
Good Advice
0
No reactions
NZ

Offline A10 JWO

  • Resident Legend
  • *****
  • Join Date: Oct 2012
  • Posts: 728
  • Karma: 2
Re: POR 15
« Reply #14 on: 25.02. 2020 18:21 »
Have painted over the patch and it took well. Took the tank to the paint shop and it's off to be colour matched, so work will start Monday. It goes off rock hard, fingers crossed. Thank you everyone.
Good Advice
0
No reactions