Author Topic: Rev counter  (Read 6554 times)

Offline BSA500

  • Wise & Enlightened
  • *
  • Join Date: Dec 2007
  • Posts: 1009
  • Karma: 5
  • Tonbridge,Kent,UK
Re: Rev counter
« Reply #15 on: 30.06. 2025 23:10 »
Stumbled across a forum post on here from God knows when that stated the A65 rev counter/oil pump drives clock wise so A65 clocks would need converting but they are a dam sight cheaper than the chronos. A black face rev counter can be had for £60 that's 3:1 ratio.

1960 A7 (57 motor to SS spec)

Offline BSA500

  • Wise & Enlightened
  • *
  • Join Date: Dec 2007
  • Posts: 1009
  • Karma: 5
  • Tonbridge,Kent,UK
Re: Rev counter
« Reply #16 on: 16.09. 2025 13:37 »
Does anyone know if the RSM3003 black faced tachos used on later A65 can be used as is on the drive from the oil pump drive from our pre units??

1960 A7 (57 motor to SS spec)

Online berger

  • Wise & Enlightened
  • *
  • Join Date: Nov 2017
  • Posts: 3778
  • Karma: 24
  • 5oo cafe , berger build norbsa ,
Re: Rev counter
« Reply #17 on: 16.09. 2025 16:11 »
our pre units are 3 to 1 anti clock from the oil pump drive

Online Bsareg

  • Resident Legend
  • *****
  • Join Date: Mar 2016
  • Posts: 575
  • Karma: 4
Re: Rev counter
« Reply #18 on: 16.09. 2025 18:52 »
If the A65 clock is magnetic ( cable entry in centre of the case) then I wouldn't think it could be converted (rotation) without changing the entire mech as the needle is move by proximity to a magnet spinning on the end of the cable axis.
Helston, Cornwall C11,B40,B44 Victor,A10,RGS,M21,Rocket3,REBSA

Online berger

  • Wise & Enlightened
  • *
  • Join Date: Nov 2017
  • Posts: 3778
  • Karma: 24
  • 5oo cafe , berger build norbsa ,
Re: Rev counter
« Reply #19 on: 16.09. 2025 22:24 »
yes correct bsareg and the magnetics internals get changed from 2to1 or 4 to1 to 3to1 anti clock like i have had done on betsy donkys years ago and betsy two last month , gaggs did betsy 1's and the nice chap at timeless motorcycles did betsy 2's