Well, I bought it. I paid £45 for a NOS prop stand for my Plungy. I was able to avoid postage cost as the chap lives close to my daughter. I've just been removing the adapted Triumph one that I had and fitted the real McCoy. It's more delicate looking than the one I took off and the bike leans a little further over making it easier to use on a cambered road edge. If anyone is desperate for a side stand for a plunger (that has the fixed part welded/brazed to the frame) let me know. You'll need to source the bolt, nut and spring for it and it would be better if it was shortened a little to allow the bike to lean over more but it's been ok for me.