In addition to all this information, I think it would also be a good idea to ask about specific bolts and nuts under specific conditions. For example, certain billet conrods require 50 ft-lbs vs. the 22 ft-lbs from the A50/A65 list. Also, the years referenced in that list are meaningless with regard to our bikes. Many folks here use 30-32 ft-lbs for 3/8" cyclinder head bolts, for which the list waits until 1969 to cite that value. Additionally, when being specific you pick up additional tidbits of advice, like using thick washers under those head bolts if you have an alloy head.
Richard L.