hi guys, just completed wiring up the A10. Started with a loom that i obtained some years ago seemed like a ton of wires to get inside the headlight, lots of short wires that i couldn`t use. Halfway into wiring decided to take it all out and start again so after unravelling it so i could use some and toss the rest. I then decided to add an ignition switch and fuse, that turned into rejigging the wiring diagram and running a fuse for everything also incorporating electronic ignition. Probably went over the top but it worked out ok when tested only blew one fuse when i subconsciously connected a negative marked wire to earth completely forgot about positive earth for a moment, all corrected and tested, cheers