Author Topic: Why Two Part Nums for A7/A10 Cam Follower?  (Read 336 times)

Offline Peter Gee

  • Valued Contributor
  • ****
  • Join Date: Apr 2015
  • Posts: 268
  • Karma: 1
Why Two Part Nums for A7/A10 Cam Follower?
« on: 29.07. 2015 15:29 »
Hi,

What is the difference in A7SS/A10 cam followers that they have differing part numbers, and how do you tell which is which between 67-332 and 67-333?

Much appreciated

Peter In Kenya
Good Advice
0
No reactions

Online Klaus

  • Valued Contributor
  • ****
  • Join Date: Jun 2015
  • Posts: 381
  • Karma: 10
Re: Why Two Part Nums for A7/A10 Cam Follower?
« Reply #1 on: 29.07. 2015 17:09 »
Hi Peter,

the difference is head design and wight.
One have rounded head and look more massive. Wight is 58 gramms
The light ones looks a bit like a tower and is smaller in circuit at the head. 50 gramms

But I don't know the partnumbers each one.

Cheers Klaus
Good Advice
0
No reactions


If you think, everything is under control, you are not fast enought.

Offline Peter Gee

  • Valued Contributor
  • ****
  • Join Date: Apr 2015
  • Posts: 268
  • Karma: 1
Re: Why Two Part Nums for A7/A10 Cam Follower?
« Reply #2 on: 29.07. 2015 21:12 »
Ive written my post confusingly. What I meant to say was, why are the cams a set, yet have different part numbers and what is that difference? Klaus has kindly weighed them. I wish to buy new repro set and fear they will be all one type instead of two 332 and two x 333.

Thanks guys
Good Advice
0
No reactions

Offline muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8469
  • Karma: 111
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Why Two Part Nums for A7/A10 Cam Follower?
« Reply #3 on: 29.07. 2015 21:48 »
G'day Peter. A set will have two of each. The outer two are different to the inner two due to the holding mechanism.
Cheers
Good Advice
0
No reactions
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7

Offline Peter Gee

  • Valued Contributor
  • ****
  • Join Date: Apr 2015
  • Posts: 268
  • Karma: 1
Re: Why Two Part Nums for A7/A10 Cam Follower?
« Reply #4 on: 29.07. 2015 22:10 »
Thanks Muskrat, that is exactly what I needed to know.
Good Advice
0
No reactions